+869173158689

Titanium Is Increasingly Used in Medical Applications

Feb 09, 2022


The application of titanium in transplantation

Artificial joints and artificial bone substitute materials should have the following basic properties: lightweight and high-strength materials, biocompatibility, corrosion resistance, tissue reaction of the implant in the body do not cause material deterioration, repeated stress caused. Fatigue, less damage, and other properties. The most important properties of metal implants are formability, machinability, and polishability. They must remain functional over the expected lifespan and not degrade when subjected to fatigue, wear, corrosion, and shock loads. Titanium and titanium alloys meet all requirements. the above requirements. The earliest used artificial joint materials such as dental tray powder, polypropylene, and plexiglass have low strength, easy to break, and have poor biocompatibility. Later, stainless steel was used, but the specific gravity of stainless steel is larger, which is about 2 times that of human bones, and corrosion and fracture will occur in the body under the action of receptor fluid. Co-Cr alloy is also an excellent artificial joint material, but unfortunately, cobalt and chromium elements are toxic to the human body. Titanium and titanium alloys have a small specific gravity (similar to that of human bone), high strength, good machining, and excellent corrosion resistance, making them ideal artificial joint materials.


The titanium materials specified for surgical implant materials are mainly pure titanium and Ti-6Al-4VELI alloy. Recently, the graft materials Ti-6Al-7Nb and Ti-13Nb1-13Zr, which have good affinity with the human body, have also been approved by ASTM standards. Using titanium to make artificial bone, cells can regenerate on it, bone can grow, titanium has a good affinity with human bone, epithelium, and building tissue. In order to improve the surface quality of the implant material connected to human bone, it is also an effective method to apply a bioceramic layer to the roughened surface. At present, titanium and titanium alloys have been widely used in artificial bone joints, artificial bones, joint footplates, broken bone fixators, intramedullary nails, artificial heart valves, cranial bones, etc. According to statistics, China's annual demand for titanium alloy artificial joints exceeds 5,000 sets, and the clinical application effect is good.

The application of titanium in orthopedic surgery

The elastic modulus of medical titanium alloy is closer to that of human bones than stainless steel and is suitable for human orthopedic surgery. In orthopedic surgery, titanium-nickel shape memory alloys are mostly used. Studies have shown that NT-SMA is a new material that integrates wear resistance, corrosion resistance, shape memory effect, pseudoelasticity, and acoustic damping. In addition to fixation, scoliosis correction, etc., Shanghai Changhai Hospital has carried out a series of designs and clinical applications for NT-SMA, such as NT-patella concentrator, NT-arc fork nail, NT-bow device, NT-flying device (specialized designed for sacral reconstruction), etc., and achieved satisfactory results. For titanium alloy materials applied to the human body, countries are still making efforts to explore and seek new and safer, and more reliable titanium alloys for the benefit of people all over the world.

Application of Titanium in Pharmaceutical Industry

Titanium is mainly used in the pharmaceutical industry to make vessels, reactors, and heaters. In pharmaceutical production, the equipment is often exposed to hydrochloric acid, nitric acid, sulfuric acid, other inorganic acids, organic acids, and salts. The equipment is often damaged due to corrosion. At the same time, the iron ion pollution caused by the steel equipment affects the product quality. Titanium equipment is used. can solve these problems. For example, penicillin esterification kettle, saccharification tank, chloramphenicol thin-film evaporator, Analgin reactor, metal filter, dimethyl sulfate cooler, liquid medicine filter, etc., all have precedents for selecting titanium materials. The quantity and quality of the liquid medicines produced are constantly improving, and the quality is in full compliance with the provisions of the Chinese Pharmacopoeia.

Application of Titanium in Medical Devices

Titanium and titanium alloys have good corrosion resistance, and titanium is non-toxic and non-magnetic and is a good choice for medical equipment. In the history of the development of surgical instruments, the first-generation surgical instruments were mostly made of carbon steel and were eliminated because the performance after electroplating did not meet the requirements for clinical use. The second generation is austenitic, ferritic, and martensitic stainless steel surgical instruments, but the chromium in the stainless steel composition is toxic, and the chromate layer that falls off has a certain impact on the human body. Therefore, the third generation - titanium surgical instruments appeared. Titanium's lightweight properties make it particularly suitable for microsurgery. Titanium has corrosion resistance, good elasticity, no deformation, etc., and the surface quality is not affected by repeated cleaning and disinfection. It is non-magnetic and can eliminate the threat of damage to tiny and sensitive implanted electronic devices, making titanium surgical instruments more and more widely used. wider. At present, it has been used to make surgical blades, hemostatic forceps, scissors, electric bone drills, forceps, and so on. In medical equipment, titanium vascular suture needles, sternum sutures, titanium filters for oxygen filters, one of the cardiac surgical instruments, titanium electrodes are used in electrocardiographs, and titanium incubators are used in in vitro culture machines; medical ultrasonic crushing The probe of the machine, the automatic controller of the blood transport box, and the titanium instruments for ophthalmic surgery, etc., are currently in good use.

Dental applications of titanium and titanium alloys

Because titanium has excellent corrosion resistance and human body affinity and considers metal allergy and specific strength, it is suitable for application in the dental field. The metals used in dental surgery began with amalgam and metal crowns in the 1920s. In the 1960s, gold, silver, and palladium alloys were mainly used. After the 1970s, stainless steel became permanent and removable instruments for orthodontics. The most commonly used material, titanium casting technology was popularized and applied in the 1990s. Dental use of titanium precision casting machine has the characteristics of high dimensional accuracy, no bubbles, and shrinkage holes. Among the metal materials used for human hard tissue repair, the elastic modulus of titanium is the closest to human tissue, which can reduce the impact of metal implants and bone Mechanical incompatibility between tissues. Titanium has the lowest thermal conductivity of all metal materials for dental restorations, and low thermal conductivity can reduce thermal stimulation to the pulp of crowned teeth, which is important for dental restorations. Titanium inlays, full crowns, etc. can protect the pulp and avoid hot and cold stimulation. In terms of material, dental titanium is mostly pure titanium, but its strength is insufficient, it is difficult to grind, has poor wear resistance, is prone to casting defects, and is of unstable quality. Titanium alloy has high strength, the most commonly used is Ti-6Al-4V alloy, but because metal V is harmful to the human body, Nb is used instead of V, and Ti-6Al-7Nb alloy has been successfully developed, which has excellent corrosion resistance and is resistant to corrosion. It is basically harmless to the human body, has other advantages such as strong plasticity and excellent abrasiveness, and has been approved by ASTM standards. At present, superelastic Ti-Ni alloys are being promoted for use in tooth straightening. Since the 1980s, developed countries have begun to study the application of titanium in oral restoration, first for dental implants, and later for denture brackets, crown bridges, and orthodontic wires. At present, titanium can be used as dental crowns and crown nails. , fixed bridge, porcelain bridge, bonding bridge, denture snap ring, base, connecting device, and strengthening device, almost all metal parts of the denture can be made of titanium. The study of titanium and titanium alloys has become a hot spot in the study of dental application alloys. Titanium alloy porcelain teeth can restore the shape and function of the tooth very well and have high strength, beautiful appearance, stable color, smooth surface, wear resistance, and corrosion resistance. It is a permanent restoration and is suitable for all fixed teeth. In particular, it has good biocompatibility and is suitable for people who are sensitive to nickel ions. It has been widely used in tooth restoration.


Please send an email to sales1@bjjfti.com if needed, or submit your requirements at the bottom, we will reply to you within 12 hours!  
Send Inquiry