Contact Us
-
Gaoya Industrial Park, Gaoya village, Bayu Town, high-tech Development Zone, Baoji City, Shaanxi Province, Chin
-
+86-917-3158689
Gr1 Titanium Plate
1.Gr1 titanium plate used in most of the chemical processing plants and is cold formabled, with the most popular grades 1to 4. Gr1 titanium plate has ultimate tensile strength at and above 40,000 psi.
2.According to the impurity content, Gr1 titanium plate is divided into high-purity titanium sheet (purity up to 99.9%) and industrial pure titanium sheet (purity up to 99.5%).
3.Payment terms: T/T, L/C.
4.Delivery time: 5-7 days.
Description
Related grades
American :GR1, GR2, GR3, GR5, GR7, GR12
Russian:BT1-00, BT1-0, BT1-2.
Chinese :TA0,TA2, TA3, TA5,TA6,TA7, TA9, TA10, TB2, TC1, TC2, TC3,TC4.
Related products





Size
|
Grade |
TA1,TA2,TA3, TC4,GR1,GR2,GR5 |
|
Standard |
GB/T 3621-2007,GB/T 13810-2007ASTM B265,ASTM F136,ASTM F67, |
|
Size |
T 0.5-5.0mm x W1000mm x L 2000-3500mmT 6.0- 30mm x W1000-2500mm x L 3000-6000mmT 30- 80mm x W1000mm x L 2000mm |
|
Application |
Metallurgy, electronics, medical, chemical, petroleum, medicine, aerospace, etc |
|
Thickness (mm ) |
thickness allowable deviation |
|
(3.71 to 4.76), excl |
0.36 |
|
3.33 to 3.68 |
0.31 |
|
2.92 to 3.30 |
0.25 |
|
2.51 to 2.90 |
0.23 |
|
2.13 to 2.49 |
0.20 |
|
1.85 to 2.11 |
0.18 |
|
1.50 to 1.83 |
0.15 |
|
1.04 to 1.47 |
0.13 |
|
0.69 to 1.02 |
0.10 |
|
0.43 to 0.66 |
0.08 |
|
0.20 to 0.41 |
0.05 |
|
0.15 to 0.18 |
0.04 |
|
0.13 |
0.03 |
State
Hot working (R)
Cold working (Y)
Annealed(M)
Gr1 titanium plate manufacturing process
1.Hot forging Forging process performed above the recrystallization temperature of a metal.
2. Hot rolling a rolling process at a temperature higher than recrystallization.
3. Cold rolling process in which the plastic deformation temperature is lower than the recovery temperature.
4. Annealing: A process of heat treatment of metals by heating them slowly to a certain temperature, holding them for a sufficient time, and then cooling them at a suitable rate (usually slow cooling, sometimes controlled cooling).
5. Pickling: Immersion of a product in an aqueous solution, such as sulfuric acid, to remove a thin film, such as oxide, from the metal surface. It is the pretreatment or intermediate treatment of electroplating, enamel, rolling and other processes.
Characteristics of titanium plate
1.Gr1 titanium plate is the surface of the oxide film is equivalent to a good wear-resisting hair separation agent, the use of titanium plate to save the separation agent, so that the plate is easy to peel, avoid the process of pre-processing of the plate, titanium plate is half lighter than the copper plate.
2. The service life of Gr1 titanium plate is more than 3 times that of copper seed plate, up to 10 to 20 years according to the operating conditions
3. The electrolytic copper prepared with titanium seed plate has compact crystal structure, smooth surface and excellent quality.
4. Because Gr1 titanium plate does not need to smear separation agent, it can avoid the pollution of copper electrolyte.
5. Improve the capacity and reduce the production cost of electrolytic copper, so as to have better economic benefits.
Hot Tags: gr1 titanium plate, China, suppliers, manufacturers, factory, customized, wholesale, low price, for sale, in stock, hot sale, made in China
You Might Also Like



















