Titanium alloy is widely used in various fields because of its high strength, good corrosion resistance and high heat resistance. Many countries in the world have realized the importance of titanium alloy materials, and have carried on research and development, and got practical application. Titanium alloy has great development potential in ship application. The application of titanium alloy in ship is introduced below:

1. Application in ship structure.
Although titanium and titanium alloys have high yield strength, they need inert gas protection during welding and are more difficult to be formed than steel. So titanium is rarely used in surface ship construction. Titanium and titanium alloys are mainly used in submarines, deep-sea submersives and other naval vessels to meet the requirements of high yield strength, density and corrosion resistance at the same time.
Ti80 alloy was developed in China in the 1980s. It is used to manufacture the pressure shell of deep submersible and submarine. It has excellent properties such as high strength, high toughness, corrosion resistance and weldability. The fracture toughness and stress corrosion resistance of Ti6Al4VELI alloy are better than those of Ti6Al4VELI alloy under the conditions of 785 ~ 885MPa and yield strength. The Ti91 titanium alloy developed in the 1990s has a yield strength of 700MPa.
2. Used for ship cooler.
Since titanium and titanium alloy have better corrosion resistance than other alloys in seawater, and have higher strength and lower density than common copper alloys, heat transfer efficiency can be ensured by reducing the thickness of tube wall and increasing the flow rate of seawater. The application of titanium heat exchanger is very important in nuclear submarine and other applications which have high requirements on the safety and reliability of equipment operation.
Currently the most widely used in the United States is industrial pure titanium, industrial pure titanium in natural water, seawater and a variety of chloride with special stress corrosion resistance. In the desalination equipment with sea water velocity of 3 ~ 5m/s, the fouling coefficient of titanium heat exchanger is only 0.95 ~ 0.99. China has also successfully developed some excellent performance of titanium alloy, such as Ti31 titanium alloy, used for waste heat discharge cooler, pipeline, working environment for high temperature seawater or normal temperature high speed seawater, 180℃ high temperature corrosion resistance.

3. Used for ship pipelines.
Corrosion has always been a prominent problem that restricts the maximum efficiency of the pipeline of the sea-going system because it is in direct contact with the sea water and mostly arranged in the bilge, and the working environment is harsh. TA5α titanium alloy (Ti-4Al-0.05B) was successfully developed in China in the 1970s. The yield strength of ZTiAl4 as cast is not less than 490MPa, which can be used in the manufacture of pumps and valves in Marine auxiliary systems. Ti75 titanium alloy developed in the 1980s, under the premise of good comprehensive properties, the strength is increased by 50MPa, the impact toughness and fracture toughness are 1.4 times and 1.2 times of TA5, respectively, and the stress corrosion fracture toughness is twice of TA5. Moreover, it has excellent cold and hot working properties, casting properties and low impurity sensitivity. Ti75 titanium alloy has filled the gap of 730MPa Marine titanium alloy in China and reached the international advanced level. Ti75 alloy made of reciprocating salt water pump, side double seat double ball valve stem has been used normally.
4. Used for ship propellers.
Titanium alloy has high strength, light weight, excellent cavitation erosion resistance and fatigue resistance, so it is an ideal material for making propellers. The life of ZTi6Al4V propeller is three times that of copper alloy propeller. ZTi6Al4V alloy was studied in China in the late 1960s, and was successfully applied to hydrofoil propeller in the 1970s. After 20 years of practical boat verification, the performance is good.
In addition, the high strength cast titanium alloy with better welding performance, higher toughness and better cavitation erosion resistance developed in China has been successfully used in the manufacture of a hydrofoil speedboat propeller.






