Properties and applications of titanium plates and titanium alloy plates
(1) Properties of titanium
The appearance of titanium is very similar to that of steel, with a density of 4.51 g/cm3, which is less than 60% of that of steel and is the metal element with the lowest density in refractory metals.
Titanium is very stable in air at room temperature. When heated to 400 ~ 550 ℃, a firm oxide film will be formed on the surface, which plays a protective role to prevent further oxidation. Titanium has a strong ability to absorb oxygen, nitrogen, and hydrogen. These gases are impurities that are very harmful to metal titanium, and even a small content (0.01% to 0.005%) can seriously affect its mechanical properties.
The mechanical properties of titanium, commonly known as mechanical properties, are closely related to purity. High-purity titanium has excellent machinability, good elongation, and area shrinkage, but is low strength and is not suitable for structural materials. Industrial pure titanium contains an appropriate amount of impurities, has high strength and plasticity, and is suitable for making structural materials.
Among the titanium compounds, titanium dioxide (TiO2) has the most practical value. TiO2 is inert to the human body, non-toxic, and has a series of excellent optical properties. TiO2 is opaque, with high gloss and whiteness, high refractive index and scattering power, strong covering power, and good dispersibility. The pigment made is a white powder, commonly known as titanium dioxide, which is widely used.
(2) Application of titanium
1. Application of titanium and its alloys
Dense metal titanium is highly valued by the aviation industry due to its lightweight, higher strength than aluminum alloys, and its ability to maintain higher strength than aluminum at high temperatures. Considering that the density of titanium is 57% of that of steel, its specific strength (strength/weight ratio or strength/density ratio) is high, and its anti-corrosion, anti-oxidation, and anti-fatigue capabilities are all strong, and 3/4 of titanium alloys are used like 1/4 of the structural materials represented by aviation structural alloys are mainly used as corrosion-resistant alloys.
Titanium alloys are divided into low strength and high plasticity, medium strength and high strength, ranging from 200 (low strength) to 1300 (high strength) MPa, but in general, titanium alloys can be regarded as high strength alloys. They are stronger than aluminum alloys, which are considered medium-strength, and can completely replace certain types of steel in strength. Some titanium alloys can still maintain good strength at 600°C compared to aluminum alloys whose strength decreases rapidly at temperatures above 150°C.
In addition to strength, titanium alloys can be divided into heat resistance, corrosion resistance, low temperature, and special functions (such as TiNi shape memory alloy, TiFe hydrogen storage alloy) and other titanium alloys according to their uses. , metastable and other types. So far, more than 100 alloy grades have been put into production, and only more than 10 are widely used in the industry. Among them, Ti-6Al-4V, which is used as a structural alloy, accounts for 60% of the entire sales market of titanium alloys, taking the dominant position, followed by Ti-5Al-2.5Sn, whose long-term working temperature can reach 500 ℃ (strength of 780~ 980 MPa).
However, titanium has two main factors that keep this resource-rich element from being a commonly used metal. The first is cost. According to the market price in the United States, each pound (1 pound = 0.45 kg) of titanium ingots is 8 to 12 dollars, aluminum ingots are 1.00 to 1.30 dollars per pound, and carbon steel is 0.20 to 0.40 dollars per pound. But the main factor is that titanium itself is extremely reactive and difficult to handle. The atmosphere in the furnace must be strictly controlled, and the welding must be carried out in an inert atmosphere. Titanium metal has high activity, low thermal conductivity, high deformation resistance, and poor plasticity at room temperature. During the deformation process, it is not only easy to bond with the mold, especially during machining, but the tool and abrasive also tend to bond to the hot machined surface, making the standard The manufacture of structural parts produces a large amount of scrap titanium scrap, the so-called residual titanium. Generally, forged titanium ingots can produce 70% residual titanium, and sometimes this number can be as high as 90%.
In order to reduce the burden caused by the high cost, on the one hand, the residual titanium treatment process was developed, and on the other hand, high-tech technologies such as near-net forming, superplastic forming, precision casting, and powder metallurgy, hot isostatic pressing and diffusion joining were developed. For example, powder metallurgy products processed by milling, forming, sintering, or hot isostatic pressing consolidation methods are near-net-shaped parts, and the material utilization rate is as high as 80%, which not only reduces material consumption but also significantly reduces the amount of cutting. Another example is the application of large-scale thin-walled precision casting technology in titanium alloys so that the performance of titanium castings is close to that of titanium forgings, and the cost is reduced by about 50%.
The main consumption areas of titanium and titanium alloys are firstly the aviation industry. In the 1980s, titanium used in the aviation industry in the United States accounted for 74.8% of the total amount of titanium materials. Russia and the United Kingdom were also mainly used in the aviation industry, and 90% of the titanium materials in Japan were used in the civil industry. In recent years, the application of titanium materials in non-aerospace industries has been increasing, and aerospace is still the "main" position. Since titanium was used as engine nacelles and firewalls on Douglas DC-7 airliners in 1952, many structural parts of aircraft have been made of titanium alloys. Titanium parts play a critical role in the Boeing 757, the supersonic SR-71 Blackbird, the F-22 jet fighter, space satellites, and missiles. For example, the fan discs and engine blades in the aircraft are all made of titanium castings and forgings.
A second application area for titanium is related to exploiting its corrosion resistance. Among them, the largest amount is used as electrode material for Chlor-alkali production. The service life of the titanium anode is 10 times that of the graphite anode, which nearly doubles the production capacity and saves 15% of electricity. The annual output of 10,000 tons of caustic soda requires about 5 tons of titanium.
In shipbuilding in the maritime industry, titanium has had its former glory. Each of the 6 to 7 3,000-ton nuclear submarines manufactured by the former Soviet Union uses up to 560 tons of titanium (the titanium consumption of its Alpha-class submarines is more than 908 tons). In recent years, titanium has shown great power in offshore oil and gas exploration and development. From 1997 to 1999 alone, Europe invested 15 billion US dollars in the North Sea oil and gas development, which was used to build 21 suspended production vessels and 64 platforms. . A new platform requires 50-500 tons of titanium for life safety systems, 50-100 tons for wedge-shaped stress joints, 400-1200 tons for retractable lifters, and 1400-4200 tons for fixed lifters.
In the energy industry, it is known that titanium is used as condensers and heat exchangers for power generation devices. For example, the generator sets of Taizhou Power Plant, Shanghai Jinshan Thermal Power Plant, and Zhenhai Power Plant all use titanium tube condensers, and the amount of titanium used is about 700 tons. Both Qinshan and Daya Bay nuclear power plants have selected all-titanium condensers. In recent years, in the geothermal development of geothermal wells, titanium has also made great strides, fully demonstrating its anti-corrosion ability. It is used as a power steam turbine in the high-temperature corrosive environment of geothermal brine, and other materials have to be replaced by titanium due to their short life. The advantage of using titanium is that it can improve the productivity of heat production and the life of geothermal wells. Since the 1990s, the United States has drilled a geothermal well with a temperature of up to 300 ° C in the Salton Sea area of Southern California, so that 227 tons of Ti-6Al-4V-0.1Ru alloy hot-rolled seamless pipes have been used. It is estimated that the amount of titanium used in geothermal development around the world in the next ten years may reach 2,400 tons. If the Yangbajing Power Station in the Tibet region of our country adopts titanium material, its appearance will be greatly improved.
Offshore oil and gas drilling and geothermal development mainly use Ti-6Al-4VELI, Ti-3Al-2.5V, Ti-6Al-4V-0.1Ru, Ti-3Al-2.5V-0.1Ru, and molybdenum-containing Ti-38644 (Ti-3Al- 8V-6Cr-4Zr-4Mo) and other alloys. Marine fasteners use Ti-5111 (Ti-5Al-1Sn-1Zr-1V-0.8Mo) alloy. In order to meet the needs of marine engineering, my country has also developed alloys such as Ti75, Ti31, and Ti631.
According to statistics, a 200,000-kilowatt thermal power unit uses 90 tons of titanium, and a nuclear power plant uses 80 to 100 tons of titanium. It can be seen that the amount of titanium used in energy and corrosion cannot be ignored.
Golf balls, biomaterials, and automotive manufacturing are three promising new application areas for titanium.
In the field of sports and leisure, the increase in the amount of golf equipment is quite dramatic. In 1993, titanium had not yet entered this field. In 1997, the amount of titanium used increased to 4,000 tons. The reason is that the use of titanium as a bat has high strength and light texture, and the average hitting distance is increased by 20 to 30 yards (1 yard = 0.9144 meters) or 15%. The advent of titanium bats resulted in the addition of 448 new courses in the United States in 1998. The number of players reached 25 million (nearly half of the world). Only 500 bats were sold in 1994, 190,000 in 1995, and 1.72 million in 1997. Titanium is very useful in the field of leisure sports, such as skis, sleds, ice axes, crampons, and other mountain-climbing facilities.
Titanium has excellent biocompatibility, low expansion coefficient, high durability, and non-magnetic properties, making it an excellent bone support material. As an implanted hip, its weight is about half that of stainless steel, and the bone tissue can also directly adhere to the titanium implant as it grows. Knee joints, denture reconstruction, etc. also use titanium alloys. According to statistics, the amount of titanium used for medical implantation in the world every year is between 600-1000 tons. In addition to Ti-6Al--4VELI (ultra-low interstitial oxygen), the titanium material used has also developed a non-aluminum (exempt to kidney and lung toxicity) Ti metal 21SRx (Ti-2.75Nb-15.2Mo-0.34Fe-0.18Si-0.250 ) and Ti metal 21S (Ti-2.9Nb-14-9Mo-0.09Fe-2.9Al-0.22Si-0.140), Ti-6Al-7Nb and other titanium alloys.
The production of low-cost titanium and the development of titanium powder processing technology have made it possible to extend the application of titanium to the automotive industry. Springs made of titanium have begun to be used in Formula 1 cars, racing motorcycles, and the most advanced Ferrari cars. It is estimated that it will be used in engine valves, connecting rods, suspension springs, exhaust systems, and fasteners of light vehicles in the near future. It is estimated that titanium's aggressive entry into the automotive market will start from Japan and the United States. The United States can produce 16 million cars and light trucks every year, and Japan's Honda Company has already used titanium valves for the Altezza family car in the second half of 1998.
2. Application of Titanium Dioxide
Titanium dioxide is mainly used in coatings, plastics, paper, synthetic fibers, printing inks, rubber, enamel, etc., which is beyond the reach of other white coatings. Titanium sol composed of ultrafine titanium dioxide, water, and organic solvents has become an independent new variety and is used in cosmetics, lens surface finishing agents, inks, and paint additives, and its application fields are still expanding. The United States is the largest producer and consumer of titanium dioxide in the world. In 1998, the output was 1.36 million tons, the apparent consumption was 1.13 million tons, and the output value was as high as 3 billion US dollars. my country's production and consumption are much smaller. The consumption of titanium dioxide in the United States is 50% for pigments, paints, and varnishes, 23% for papermaking, 23% for plastics, and 9% for other uses.
3. other apps
Titanium-iron (TiFe) made from ilmenite concentrate is a deoxidizer and stabilizer used in the manufacture of stainless steel. Titanium-iron hydrogen storage anodes are different in performance from rare earth hydrogen storage materials in the manufacture of hydrogen storage batteries. Relatively low, it will have a fight with rare earth in hydrogen storage, transportation, catalysis, fuel cells, etc. Ti-Ni shape memory alloy is an indispensable high-tech material for medical and military industries. As for electronic ceramic functional materials barium titanate, strontium titanate, titanium compound catalysts, and organic titanium is an inert metals, their chemical symbol is ti, its atomic number is 22, and it is a silver medal. It has a specific gravity of 4.51 and a melting point of 1668°C. Its reserves in the earth's crust are very rich, and it ranks fourth after iron, aluminum, and magnesium, more than ten times more than the sum of the commonly used metals such as copper, nickel, lead, and zinc. The ores used to produce titanium in the industry include rutile, ilmenite, and titanomagnetite. Due to the difficulty of separation and extraction, titanium metal with industrial significance was not produced until the 1940s. Therefore, titanium is generally referred to as a rare light metal. Due to the different titanium and titanium alloy products required by different products in different fields, people process them into plates, rods, tubes, strips, wires, etc., which can be provided to the majority of demanders in deep-processing shapes to meet the needs of different fields. Titanium plates, titanium rods, and titanium tubes are the most widely used. The following introduces the properties of titanium plates commonly used in the chemical industry: 1. The executive standard for titanium plate and titanium alloy plate: GB/T3621-2007
three. Mechanical properties of titanium plate
4. Surface quality
The surface of the titanium plate should be smooth and metallic. Sheets are permitted to be delivered with a sandblasted surface.
Slight darkening and local watermarks are allowed on the surface of the titanium plate; local defects are allowed, such as scratches, indentations, pits, and other defects that do not exceed half of the thickness tolerance, but the minimum thickness should be guaranteed.
The surface of the titanium plate is not allowed to have macroscopic defects such as cracks, peeling, oxide skin, folds, metal and non-metal inclusions, and traces of alkali washing. The titanium plate is allowed to clear local defects along the rolling direction, but the thickness of the plate after removal is not less than the minimum allowable thickness. In addition, the titanium plate should not have delamination.
5. Application of titanium plate
Titanium and titanium alloys have low density and high tensile strength. In the range of -253-600 degrees Celsius, their specific strength is almost the highest among metal materials. It can form a thin and hard oxide in a suitable oxidizing environment. a film with excellent corrosion resistance. In addition, it has the characteristics of non-magnetic and small linear expansion coefficient. This makes titanium and alloys first known as important aerospace structural materials, and then extended to shipbuilding, chemical industry, and other fields, and has developed rapidly. Especially in the chemical field, titanium and titanium alloy products are used in more and more products, such as petrochemical, fiber, pulp, chemical fertilizer, electrochemistry, and seawater desalination industries, as exchangers, reaction towers, synthesizers, Autoclave, etc. Among them, titanium plates are used as electrolysis plates, electrolysis cells, and in reaction towers and reaction kettles as electrolysis plates and sewage desalination.
With the development of science and technology, the application fields of titanium materials are becoming wider and wider, such as medical treatment, automobiles, sports, etc. These also truly reflect that titanium, as light metal, has more and more excellent properties. It is recognized and determinable by people, and it replaces other metals and integrates into our production and application fields, and even our body at the fastest speed. Applications such as heat-resistant paints and titanium-epoxy coatings are endless.






