GR5 Titanium Target

The GR5 titanium target is made of titanium metal.As a metal, titanium is recognized for its high strength-to-weight ratio. It is a strong metal with low density that is quite ductile (especially in an oxygen-free environment), lustrous, and metallic-white in color. The relatively high melting point (more than 1,650 °C or 3,000 °F) makes it useful as a refractory metal. It is paramagnetic and has fairly low electrical and thermal conductivity.

GR5 titanium target  with Industrial grade are used for decorative coating to deposit golden, yellow, and golden yellow color. With up to 99.7% purity, uniform grain size, lower gas content, end user can obtain good hardness, high brightness, corrosion and oxidation resistant color without discolor and tarnish for a very long time. We have been supplying Titanium  Target for manufacturers of watch, sanitary ware, car mirrors, etc, which are suitable for various magnetron  machines and ionic plating machines.

High purity Titanium  Targets with up to 99.999% pure are usually used for integrated circuit, DRAMS and flat panel display application. When LSI, VLSI, and ULSI line networks are sputtered with high-purity titanium, these integrated components can be made light, thin, small in size, and dense in wiring. High purity titanium target can also be used as barrier metal material.

The microstructure can be adjusted by our flexibility production process, to achieve your desired effect. If the grains of the  target are uniformly aligned, the user can benefit from constant erosion rates and homogeneous layers. Following are two micrographs of our titanium  target, the average grain size＜20μm.

Analytical Methods:
1. Metallic elements were analyzed by GDMS and ICP-OES.
2. Gas elements were analyzed by LECO.

Material preparation-Electron beam melting-Chemical analysis-Forging-Rolling-Annealing-Metallographic inspection-Machining-Dimensional inspection-Cleaning-Final inspection-Packaging

The titanium target contains Au and Cu. The alloy composition in mass percentage is: 0.03%>Au>0.01%, 0.1%>Cu>0.07%, Fe<0.05%, 0<0.04%, N<0.015%, and the balance is Ti. Its manufacturing method is to mix AuCu20 alloy powder with a particle size of -300 mesh to -400 mesh with 1/2 inch small size sponge titanium , and then use an electron bombardment furnace for electron beam cooling bed smelting and purification to make titanium Ingot, the titanium ingot is made into a titanium target of the required specification and size by a mechanical processing method. The thickness of the film made by the titanium target of the above method is uniform, and it has stronger wear resistance and strong adhesion than the conventional coating Features.

Hot Tags: gr5 titanium target, China, suppliers, manufacturers, factory, customized, wholesale, low price, for sale, in stock, hot sale, made in China