ASTM F136 Medical Titanium Plate

Medical titanium plate is a kind of plate that provides medical titanium raw materials for domestic and foreign orthopedic implant companies, such as bone plates, bone nail rods, intramedullary nails Pipes, Kirschner wire and prosthetic accessories and other materials.      

 ASTM B265 ASTM F136 ASTM F67

GR1, GR2, GR5, GR7, GR9, GR12, GR16, Ti15333, etc.

T0.5-1.0mm x W1m x L2-4m

T1.0-5.0mm x W1-1.5m x L2-3.5m

T5.0-30mm x W1-2.5m x L3

T30-80mm x W1m x L2m

Black leather surface, bright surface, pickling surface

Hot rolled, cold rolled, annealed

Electroplating industry, glasses industry, titanium equipment industry, watches, accessories, electronics, chemical industry and other industries

acid and alkali resistance, corrosion resistance, wear resistance, high temperature resistance, low temperature resistance, light weight and high strength, non-magnetic, non-toxic.

The characteristics of medical titanium plates produce medical titanium rods, plates, pipes, wires and other products, and provide medical titanium raw materials for domestic and foreign orthopaedic implant companies, namely bone plates, bone nail rods, intramedullary nails Pipes, Kirschner wire and prosthetic accessories and other materials. 

The products strictly follow the national standards for medical implanted devices. The characteristics of medical titanium plates are several hundred degrees higher than that of aluminum alloys. They can still maintain the required strength at moderate temperatures, and can work for a long time at a temperature of 450 to 500 °C. These two types of titanium alloys are at 150 °C to 500 °C. There is still a high specific strength in the range of ℃, while the specific strength of aluminum alloy decreases significantly at 150 ℃. The working temperature of titanium alloy can reach 500 ℃, and the working temperature of aluminum alloy is below 200 ℃.

The characteristics of medical titanium plate titanium alloy works in humid atmosphere and seawater medium, and its corrosion resistance is much better than that of stainless steel; its resistance to pitting corrosion, acid corrosion and stress corrosion is particularly strong; it is resistant to alkali, chloride, Chlorine organic substances, nitric acid, sulfuric acid, etc. It has excellent corrosion resistance. However, titanium has poor corrosion resistance to media with reducing oxygen and chromium salts.

The characteristics of medical titanium plate Gr.5 titanium alloy has a series of advantages such as excellent corrosion resistance, small density, high specific strength, good toughness and weldability, etc. It is widely used in aerospace, petrochemical, shipbuilding, automobile, Medicine and other sectors have been successfully applied. Mechanical properties of Gr.5 titanium alloy: tensile strength σb/MPa≥895, specified residual elongation stress σr0.2/MPa≥825, elongation δ5(%)≥10, section shrinkage ψ(%)≥25

4.5 (g/cm3) working temperature -100 ~ 550 (℃)

Characteristics of medical titanium plate and medical titanium rod Chemical composition of Gr.5 titanium alloy:

Gr.5 contains titanium (Ti) balance, iron (Fe) ≤ 0.30, carbon (C) ≤ 0.10, nitrogen (N) ≤ 0.05, hydrogen (H) ≤ 0.015 , Oxygen (O)≤0.20, Aluminum (Al) 5.5～6.8, Vanadium (V) 3.5～4.5.

 

1.Package using the Non destructive export wooden case. 

2.Delivery by express airfreight & by sea transport,land (train)according to cargo quantities or by customer ‘ requirements . 

3.For shipping by sea we can delivery from all Chinese seaports ,but preferable Shanghai.

 

 

1. We are specializing in titanium industry more than 12 years,we have our own factory to ensure all the products are qualified and with high standard.

2. We have achieved international quality and management standards ISO9001:2015, AS9100D, GJB9001C:2007 certifications.

3. We have warehouse with large quantities stock of all kinds of titanium materials,so we can provide and we can satisfy if you need large quantities to order.

4. We can offer you with the competitive price compare with others.

5. All products will issue the full sets of certificates by qualified third-party .

6. We had rich experiences and successfully traded with many clients all over the world,and we kept very good relationship and business co-operation each other .

  

 

Baoji Jufuti non-ferrous metals co.,Ltd for short (JFTI Titanium Industry)is an integrated hi-tech enterprise and worldwide supplier specially engaged in research,production and development of titanium and other alloys in baoji city which knows as “the titanium valley “ in China.

Hot Tags: astm f136 medical titanium plate, China, suppliers, manufacturers, factory, customized, wholesale, low price, for sale, in stock, hot sale, made in China