Gr.2 Titanium Foil

Titanium foil is titanium plate, strip, roll or sheet with thickness less than or equal to 0.1mm. Another indicator for evaluating the thickness of titanium foil is the weight per unit area, such as g/m or oz/fi, etc. The higher the value, the greater the thickness. The width of titanium foil is cut according to the user's requirements. However, the wider the width is, the higher the productivity is. The length of roll barrel determines the maximum width of rolled foil. The wider, thinner and harder the rolled piece is, the harder it is to roll. The maximum width of rolled titanium foil is about 600mm. Titanium and alloy foils are mainly used in electronic, aerospace, instrumentation and other departments.

 

 

Titanium has six major characteristics:

1. High strength: the strength/density ratio of titanium is superior to other metals. It can be used to make components with high strength, good rigidity and light weight. Titanium is used in aircraft engines, frames, skins, fasteners and landing gears.

2. Corrosion prevention: Compared with stainless steel, titanium alloy has better corrosion effect in humid air and seawater. Titanium has great resistance to spot corrosion, acid corrosion and stress corrosion. Titanium is resistant to corrosion by alkali, chloride, chlorinated organic matter, sulfuric acid and nitric acid.

3. High temperature resistance: the application temperature of titanium is higher than that of aluminum alloy. Titanium can work for a long time at 450-500 ℃. Titanium alloy stil has high strength at 150-500 ℃. The working temperature of titanium can reach 500 ℃.

4. Low temperature resistance: titanium alloy still has its mechanical properties when working at low or ultra-low temperature. Titanium alloy with low temperature resistance and very low gap still has good ductility, so titanium alloy is a good low-temperature structural material.

5. Environment-friendly metal: titanium has lower thermal conductivity than carbon steel or copper, but titanium has very good corrosion resistance, so the thickness of titanium can be greatly reduced, and the heat exchange mode is dropwise condensation between titanium and steam. This mode reduces the heat transfer resistance, and there is no scaling on the titanium surface, so that the thermal conductivity of titanium is better.

6. Good thermal conductivity: titanium is a non-magnetic metal that cannot be magnetized in a large magnetic field, and titanium is non-toxic and compatible with blood, so titanium has been applied in the medical field.

 

Production mode

Rolling:

Flat roll strip rolling is the most widely used manufacturing method of titanium foil, with high productivity, large scale and output. The six-high cold rolling mill or 20-high cold rolling mill are basically used for production.

Heat treatment:

There are two main heat treatment methods for titanium strip and foil: vacuum annealing and continuous online protection annealing. Vacuum annealing is to place rolled or sheet titanium foil in a vacuum furnace for heat treatment; Continuous online protective annealing of titanium strip and foil is a new technology launched in recent years. Compared with vacuum annealing, it has higher production efficiency and higher improvement in product quality, but the equipment threshold is high, especially for product quality and mechanical properties of titanium strip and foil.

 

FAQ.

 

1. Q: How long is the sample time of products?dose the sample fee can be returned?

    A: Proofing is usually 5-7 working days.if the order reach or exceed behind MOQ quantity,proofing fee refunded.If not reached behind MOQ quantity,proofing fee will taken by your.

 

2. Q: About the sample what is the cost of transportation?

    A: The freight depends on weight,packing size and your country or province region,etc.

 

3. Q: How to control quality?

     A:

     A. All the raw materials by IQC(incoming quality control) before launch whole process into the process after the screening.

     B. Process each link in the process of IPC(input process quality control)patrol inspection.

     C. After finished by Qc full inspection before packing into the next process packaging.

     D. OQC before shipment for each product to do full inspection.

 

4. Q: how much the transportation freight of samples?

    A: The freight depends on the weight and packing size and destination from here to your location.

 

5. Q: Can we have our logo or company name to be printed on your products or package?

    A: Sure,your logo could be printed on your products by hot stamping,printing,Embossing,UV coating,silk -screen printing or sticker.

 

About Us.

 

Baoji Jufuti Non-ferrous Metals Co,Ltd. for short ( JFTI Titanium Industry ) is an integrated high-tech enterprise and worldwide supplier specialized engaged in research,production and development of titanium,nickel ,zirconium and other Non-ferrous metal alloys in baoji city which knows as "the titanium valley" in China.

 

Our main products are various specifications of titanium and titanium alloy meets international and American Standard ASTM,ASME,AMS, products are including titanium plate, tube,bar, wire ,forgings and titanium Sintered filter rod, titanium aerator, titanium filter plate，titanium pipe fittings ,titanium fasteners ,titanium CNC processing parts and nickel & zirconium tube ,plate ,bar  & other non-ferrous metals etc.

 

We have factory with area more than 6000 square meters,equipped with advanced large-scale facilities such as VAR Furnace,hydraulic press,forging press,CNC machines and plasma Arc welder.our products are widely used in industry such as aerospace,medical,chemistry,automobile,ship-Building and other fields,our clients are covered all over the world such as USA ,Canada ,UK, Germany, France, Spain ,Turkey, Saudi Arabic,Brazil,Korea,India,Russia,Netherlands,Czech republic ,Indonesia ,Vietnam etc.

 

JFTI has achieved international quality and management standards ISO9001:2015,AS9100D,GJB9001C:2007 certifications.

 

JFTI adhere to the tenet of “ Customer first, reputation win, excellent quality and high-quality service” to offer you the high quality products and good services.

 

 

 

Hot Tags: gr.2 titanium foil, China, suppliers, manufacturers, factory, customized, wholesale, low price, for sale, in stock, hot sale, made in China