According to statistics from the China Association of Automobile Manufacturers, in 2020, China's automobile production and sales were 25.225 million and 25.311 million, down 2.0% and 1.9% year-on-year. Among them, the production and sales of passenger vehicles were 19.994 million and 2017.80; the production and sales of commercial vehicles were 5.231 million and 513.3. A million vehicles; the production and sales of new energy vehicles were 1.366 million and 1.367 million, an increase of 7.5% and 10.9% year-on-year. China is the world's automobile power, not yet a powerful country, but in the field of new energy vehicles, China is both a large country and a powerful country, leading the way.
Today, reducing fuel consumption, reducing greenhouse gas emissions, and achieving the "dual carbon" goal as soon as possible have become one of the main driving forces and directions for technological progress in the automotive industry. Studies have shown that lightweight is an effective measure to save fuel and reduce pollution. Of course, the best measure is to use renewable new energy vehicles, such as electric vehicles, hydrogen fuel vehicles, ammonia fuel vehicles, hydrogen-electric vehicles, etc., new energy vehicles There is also a big problem of reducing its own quality. For every 10% reduction in vehicle quality, fuel can be saved by 8%-10%, and greenhouse gas emissions can be reduced by about 10%. For this reason, countries all over the world are making great efforts to study the lightweight of automobiles. The preferred way to reduce the weight of automobiles is to replace traditional steel and cast iron with lightweight materials, such as aluminum, magnesium, titanium, and composite materials.
Electric trucks can beat diesel trucks
Before discussing the application of titanium, let’s first introduce whether the latest electric trucks are comparable to diesel trucks, or even better. According to a report on the BBC’s website on April 9, 2021, it is generally believed that heavy-duty trucks powered by batteries are The cost cannot be compared with diesel trucks, but the latest research shows that if a fast-charging system is built for electric trucks, then electric trucks can beat diesel trucks in terms of cost. With fast charging, the bigger the car, the advantage of electric vehicles will be more obvious. About 7% of global greenhouse gas emissions are emitted by heavy-duty trucks. In order to achieve the "dual carbon" goal, this is a big problem that needs to be solved urgently.
Recently, scientists from the Stockholm Environmental Protection Research Institute in Sweden announced that the prerequisite for making electric trucks commercially competitive is fast charging instead of using larger and more batteries. Their model shows that after 4.5 hours of driving a truck, It can be fully charged in less than 40 minutes, which is cost-effective, but this requires high-power charging equipment. In order to encourage trucks to change from oil to electricity, it is hoped that relevant departments can introduce encouraging policies.
Advantages of titanium
The industrialization of titanium began in the early 1950s. The United States and the Soviet Union were the first to produce titanium. They were discussing the application of titanium in automobiles almost at the same time. However, due to price and technical reasons, no significant progress has been made until today. But it has more applications in racing cars and some special vehicles. In recent years, due to the need for energy-saving and emission reduction, there have been more topics about the application of titanium in automobiles. The main advantages of titanium can be summarized as:
●The density is low, 4.5g/cm3, sometimes it is listed as light metal, but most of them are listed as a rare refractory metal, in fact, it is not rare. Its density is only 60% of steel. Using it to make some structures of automobiles can not only reduce the mass of the car but also reduce the inertia of motion.
●High specific strength, for example, the most commonly used TC4 alloy has a specific strength> 200MPa/(g/cm3). Among the industrial pure metals used in various industries, the specific strength of titanium steadily ranks at the forefront. Therefore, titanium alloy is a good material for manufacturing load-bearing structural parts.
●The modulus of elasticity is small, 103GPa~110GPa at room temperature, 103GPa at tension, 105GPa at compression, and 45GPa at shear, which is about 50% of steel; and it has high fatigue strength and can be used for Manufacturing the spring.
●Good heat resistance, it can work for a long time at 200℃~650℃. The tensile strength of TC4 alloy at 400℃ is 620MPa and the endurance strength is 570MPa. It can be used to manufacture high-temperature structural parts.
●The coefficient of thermal expansion is small, the average value of 20℃~100℃ is 7.6X10-6K-1, which is obviously lower than that of stainless steel and aluminum, which is about 50% of them. It is suitable for preparing automobile engine valves and other structural parts.
●Titanium and titanium alloys have high corrosion resistance, higher than aluminum and magnesium, and even better than stainless steel in some environments, and can resist corrosion from the atmosphere, rain, road antifreeze, and high-temperature exhaust gas containing hydrogen sulfide Good materials are excellent materials for manufacturing fossil fuel vehicle exhaust nozzles.
●Good low-temperature performance, suitable for use at low temperature is α and (α+β) titanium alloys. Their strength performance increases with the decrease of temperature, but the toughness and elongation rarely decrease with the decrease of temperature. TC4 And TA7 are commonly used low-temperature alloys, especially TA7 is an excellent ultra-low temperature material.
●Excellent forming performance. Titanium and titanium alloys can be used to manufacture various parts and components through stamping, hot forging, bending, pressure processing, powder metallurgy, precision casting, and other processes.
●Strong decorativeness. Titanium and titanium alloys have good surface treatment properties. They can be made into bright-colored materials through anodizing and surface coating. They are good materials for manufacturing automotive decorative parts.
At present, the biggest obstacle hindering the application of titanium in automobiles is the high production cost of raw materials and the high cost of parts preparation. This bottleneck cannot be solved in the short term. Therefore, the time when passenger cars (cars, multi-purpose vehicles, multi-purpose sports cars, crossover passenger cars) and commercial vehicles use more titanium has not yet come. The production cost comparison of steel, aluminum, magnesium, and titanium is shown in Table 1.
Research and development of low-cost titanium alloys
Expanding the amount of titanium used in automobiles
The research and development of low-cost titanium alloys are the prerequisite for expanding the application of titanium in automobiles. The automobile industry is the largest potential field for titanium applications. In 2020, the global automobile production will exceed 50 million, and each additional 1kg will use 50kt/year of titanium. At the same time, " It is urgent to achieve the double-carbon standard, and the self-weight of the car must be lowered. Some major car-producing countries have formulated measures to reduce the self-weight of the car, and the use of lightweight materials is the main measure. The United States has developed the Super-TIX series of titanium alloys for the non-aerospace industry, including Ti-Al-Fe series and Ti-Fe-ON series alloys, replacing V and Mo with cheap Fe. Super-Tl × 51F ( Ti-5Al-1Fe) and Super-Tl × 800 (Ti-1Fe-0.35 O-0.01N), the former has a tensile strength of 1000MPa, which is equivalent to TC4, and the latter has a tensile strength of 800MPa, both of which are good Forming performance.
The United States, Europe, and Japan have all formulated development plans for titanium for automobiles. The United States has formulated and implemented the PNGV (Partnership for a New Generation of Vehicles) plan for automobile lightweight. With higher carrying capacity, higher maintenance, and reusability, family cars will lose 20% of their weight by 2025. Titanium was selected as one of the candidate materials for the realization of ultra-light car engines, chassis, and car bodies in the PNGV plan.
Once the cost of titanium material drops to the level accepted by the automotive industry, the automotive industry will become the main application field of titanium materials. The amount of titanium used in automobiles in the world was only about 100t in 1995, about 1100t in 2002, about 3kt in 2005, and about 11kt in 2020.






