+869173158689

Application of Titanium Alloy Tube in Deep Well Drilling

Mar 25, 2022

The radial drilling process using workover rigs, tubing and titanium alloy pipes can effectively deal with the problems of low string strength and low transmission WOB in radial drilling operations in deep wells of 6,000 meters and above in Tahe Oilfield.


Deep well titanium alloy pipeline


The researchers selected the one-way curved steering track with straightening section through numerical simulation, and found the influence of its own steering radius, outer diameter and wall thickness of titanium alloy tube, track and string gap on drilling capacity, and secondly , through the orthogonal test method, the above-mentioned data are then used for parameter optimization and sensitivity calculation.


There is an inverse relationship between the turning radius and clearance of the track and the steering resistance, while the outer diameter and wall thickness of the titanium alloy tube have a positive relationship with it. Therefore, the researchers analyzed the experimental results and recommended the optimal combination parameters of the titanium alloy tube and the diverter track as follows: the track turning radius is 600 mm, the turning angle is 30°, the outer diameter of the titanium alloy tube is 25 mm, and the wall thickness is 25 mm. is 2 mm, and the gap between the titanium alloy tube and the steering gear track is 4 mm.


Send Inquiry