The filter element in the middle of the titanium filter is made of titanium powder by forming and sintering at high temperature, so the surface particles are not easy to fall off; the operating temperature in the air can reach 500-600 °C; it is suitable for filtration of various corrosive media. In addition, it has excellent properties such as no heavy metals, easy to ensure filtration accuracy, and easy regeneration;
Part of the particles with smaller diameters pass through the inner space of the filter, and they will enter the micropores on the wall of the titanium tube. Because there are many curved pores on the inner wall of the tube, they cross each other, and the pores in the tube are curved and thin. Long, impurity particles are easily intercepted after entering the titanium pipe channel. Because this filtration is carried out inside the titanium rod, this method is a form of deep filtration.
Most of the impurities contained in the solution in the filter tube will be intercepted, mainly concentrated on the outer surface of the filter core and the inner wall of the titanium tube, and the filtered target solution will flow out from the water outlet. However, it should be noted that once the pressure on the filter in the titanium filter cartridge gradually increases and reaches a certain amount, the tube core needs to be replaced and cleaned.
Titanium-containing filter equipment is now available in major shopping places in a low-key, quality-assured way, which will greatly promote the application of titanium materials to life and daily use.
