Titanium drive flange joints are a component made of the non-ferrous metal titanium or titanium alloy, which is mainly used to connect pipes to each other and to the pipe ends. It is generally used in industry in order to fix machinery and equipment to concrete or reinforced concrete foundations above. But once the flange attack damage in a short period of time is difficult to do correction, so the equipment is also difficult to use in a short period of time quickly.
Titanium flange correction difficulties in a short period of time can not recover to normal, so in advance planning and manufacturing to pay extra attention, are in accordance with the rules to plan and processing. Among them, we should pay special attention to the installation and use, which generally refers to the installation as well as the height and straightness of the above to meet the requirements of planning. In the use of time, if the equipment found to have any abnormal boom should be identified beforehand to identify the causes and failures before they can run. Titanium drive flange joint installation should meet the following requirements: flange joint to the edge of the foundation distance of not less than 7 times the diameter of the flange joint; installation of flange joint foundation strength shall not be less than 10MPa; flange joint shall not have cracks, pay attention to prevent the drill and the foundation of the steel, buried pipe collision.
Titanium flange installation national standard for a national standard commonly used in recent years, its methods and requirements with the flange joint. But the installation of attention to the hole debris blowing clean, and shall not be damp. In the installation of titanium drive flange joint to pay attention to: should be flat and straight shall not be skewed. If the installation equipment is not straight, the equipment coordinates of the flange joint will inevitably be wrong and bring difficulties to the equipment. If the bottom of the titanium flange joint hole is thick, it will not be possible to install the equipment. As the flange joint is not straight, its ability to withstand external forces is reduced.
